/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
/*
* INET An implementation of the TCP/IP protocol suite for the LINUX
* operating system. INET is implemented using the BSD Socket
* interface as the means of communication with the user level.
*
* Global definitions for the INET interface module.
*
* Version: @(#)if.h 1.0.2 04/18/93
*
* Authors: Original taken from Berkeley UNIX 4.3, (c) UCB 1982-1988
* Ross Biro
* Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#ifndef _LINUX_IF_H
#define _LINUX_IF_H
#include <linux/libc-compat.h> /* for compatibility with glibc */
#include <linux/types.h> /* for "__kernel_caddr_t" et al */
#include <linux/socket.h> /* for "struct sockaddr" et al */
/* for "__user" et al */
#include <sys/socket.h> /* for struct sockaddr. */
#if __UAPI_DEF_IF_IFNAMSIZ
#define IFNAMSIZ 16
#endif /* __UAPI_DEF_IF_IFNAMSIZ */
#define IFALIASZ 256
#define ALTIFNAMSIZ 128
#include <linux/hdlc/ioctl.h>
/* For glibc compatibility. An empty enum does not compile. */
#if __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO != 0 || \
__UAPI_DEF_IF_NET_DEVICE_FLAGS != 0
/**
* enum net_device_flags - &struct net_device flags
*
* These are the &struct net_device flags, they can be set by drivers, the
* kernel and some can be triggered by userspace. Userspace can query and
* set these flags using userspace utilities but there is also a sysfs
* entry available for all dev flags which can be queried and set. These flags
* are shared for all types of net_devices. The sysfs entries are available
* via /sys/class/net/<dev>/flags. Flags which can be toggled through sysfs
* are annotated below, note that only a few flags can be toggled and some
* other flags are always preserved from the original net_device flags
* even if you try to set them via sysfs. Flags which are always preserved
* are kept under the flag grouping @IFF_VOLATILE. Flags which are __volatile__
* are annotated below as such.
*
* You should have a pretty good reason to be extending these flags.
*
* @IFF_UP: interface is up. Can be toggled through sysfs.
* @IFF_BROADCAST: broadcast address valid. Volatile.
* @IFF_DEBUG: turn on debugging. Can be toggled through sysfs.
* @IFF_LOOPBACK: is a loopback net. Volatile.
* @IFF_POINTOPOINT: interface is has p-p link. Volatile.
* @IFF_NOTRAILERS: avoid use of trailers. Can be toggled through sysfs.
* Volatile.
* @IFF_RUNNING: interface RFC2863 OPER_UP. Volatile.
* @IFF_NOARP: no ARP protocol. Can be toggled through sysfs. Volatile.
* @IFF_PROMISC: receive all packets. Can be toggled through sysfs.
* @IFF_ALLMULTI: receive all multicast packets. Can be toggled through
* sysfs.
* @IFF_MASTER: master of a load balancer. Volatile.
* @IFF_SLAVE: slave of a load balancer. Volatile.
* @IFF_MULTICAST: Supports multicast. Can be toggled through sysfs.
* @IFF_PORTSEL: can set media type. Can be toggled through sysfs.
* @IFF_AUTOMEDIA: auto media select active. Can be toggled through sysfs.
* @IFF_DYNAMIC: dialup device with changing addresses. Can be toggled
* through sysfs.
* @IFF_LOWER_UP: driver signals L1 up. Volatile.
* @IFF_DORMANT: driver signals dormant. Volatile.
* @IFF_ECHO: echo sent packets. Volatile.
*/
enum net_device_flags {
/* for compatibility with glibc net/if.h */
#if __UAPI_DEF_IF_NET_DEVICE_FLAGS
IFF_UP = 1<<0, /* sysfs */
IFF_BROADCAST = 1<<1, /* __volatile__ */
IFF_DEBUG = 1<<2, /* sysfs */
IFF_LOOPBACK = 1<<3, /* __volatile__ */
IFF_POINTOPOINT = 1<<4, /* __volatile__ */
IFF_NOTRAILERS = 1<<5, /* sysfs */
IFF_RUNNING = 1<<6, /* __volatile__ */
IFF_NOARP = 1<<7, /* sysfs */
IFF_PROMISC = 1<<8, /* sysfs */
IFF_ALLMULTI = 1<<9, /* sysfs */
IFF_MASTER = 1<<10, /* __volatile__ */
IFF_SLAVE = 1<<11, /* __volatile__ */
IFF_MULTICAST = 1<<12, /* sysfs */
IFF_PORTSEL = 1<<13, /* sysfs */
IFF_AUTOMEDIA = 1<<14, /* sysfs */
IFF_DYNAMIC = 1<<15, /* sysfs */
#endif /* __UAPI_DEF_IF_NET_DEVICE_FLAGS */
#if __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO
IFF_LOWER_UP = 1<<16, /* __volatile__ */
IFF_DORMANT = 1<<17, /* __volatile__ */
IFF_ECHO = 1<<18, /* __volatile__ */
#endif /* __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO */
};
#endif /* __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO != 0 || __UAPI_DEF_IF_NET_DEVICE_FLAGS != 0 */
/* for compatibility with glibc net/if.h */
#if __UAPI_DEF_IF_NET_DEVICE_FLAGS
#define IFF_UP IFF_UP
#define IFF_BROADCAST IFF_BROADCAST
#define IFF_DEBUG IFF_DEBUG
#define IFF_LOOPBACK IFF_LOOPBACK
#define IFF_POINTOPOINT IFF_POINTOPOINT
#define IFF_NOTRAILERS IFF_NOTRAILERS
#define IFF_RUNNING IFF_RUNNING
#define IFF_NOARP IFF_NOARP
#define IFF_PROMISC IFF_PROMISC
#define IFF_ALLMULTI IFF_ALLMULTI
#define IFF_MASTER IFF_MASTER
#define IFF_SLAVE IFF_SLAVE
#define IFF_MULTICAST IFF_MULTICAST
#define IFF_PORTSEL IFF_PORTSEL
#define IFF_AUTOMEDIA IFF_AUTOMEDIA
#define IFF_DYNAMIC IFF_DYNAMIC
#endif /* __UAPI_DEF_IF_NET_DEVICE_FLAGS */
#if __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO
#define IFF_LOWER_UP IFF_LOWER_UP
#define IFF_DORMANT IFF_DORMANT
#define IFF_ECHO IFF_ECHO
#endif /* __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO */
#define IFF_VOLATILE (IFF_LOOPBACK|IFF_POINTOPOINT|IFF_BROADCAST|IFF_ECHO|\
IFF_MASTER|IFF_SLAVE|IFF_RUNNING|IFF_LOWER_UP|IFF_DORMANT)
#define IF_GET_IFACE 0x0001 /* for querying only */
#define IF_GET_PROTO 0x0002
/* For definitions see hdlc.h */
#define IF_IFACE_V35 0x1000 /* V.35 serial interface */
#define IF_IFACE_V24 0x1001 /* V.24 serial interface */
#define IF_IFACE_X21 0x1002 /* X.21 serial interface */
#define IF_IFACE_T1 0x1003 /* T1 telco serial interface */
#define IF_IFACE_E1 0x1004 /* E1 telco serial interface */
#define IF_IFACE_SYNC_SERIAL 0x1005 /* can't be set by software */
#define IF_IFACE_X21D 0x1006 /* X.21 Dual Clocking (FarSite) */
/* For definitions see hdlc.h */
#define IF_PROTO_HDLC 0x2000 /* raw HDLC protocol */
#define IF_PROTO_PPP 0x2001 /* PPP protocol */
#define IF_PROTO_CISCO 0x2002 /* Cisco HDLC protocol */
#define IF_PROTO_FR 0x2003 /* Frame Relay protocol */
#define IF_PROTO_FR_ADD_PVC 0x2004 /* Create FR PVC */
#define IF_PROTO_FR_DEL_PVC 0x2005 /* Delete FR PVC */
#define IF_PROTO_X25 0x2006 /* X.25 */
#define IF_PROTO_HDLC_ETH 0x2007 /* raw HDLC, Ethernet emulation */
#define IF_PROTO_FR_ADD_ETH_PVC 0x2008 /* Create FR Ethernet-bridged PVC */
#define IF_PROTO_FR_DEL_ETH_PVC 0x2009 /* Delete FR Ethernet-bridged PVC */
#define IF_PROTO_FR_PVC 0x200A /* for reading PVC status */
#define IF_PROTO_FR_ETH_PVC 0x200B
#define IF_PROTO_RAW 0x200C /* RAW Socket */
/* RFC 2863 operational status */
enum {
IF_OPER_UNKNOWN,
IF_OPER_NOTPRESENT,
IF_OPER_DOWN,
IF_OPER_LOWERLAYERDOWN,
IF_OPER_TESTING,
IF_OPER_DORMANT,
IF_OPER_UP,
};
/* link modes */
enum {
IF_LINK_MODE_DEFAULT,
IF_LINK_MODE_DORMANT, /* limit upward transition to dormant */
IF_LINK_MODE_TESTING, /* limit upward transition to testing */
};
/*
* Device mapping structure. I'd just gone off and designed a
* beautiful scheme using only loadable modules with arguments
* for driver options and along come the PCMCIA people 8)
*
* Ah well. The get() side of this is good for WDSETUP, and it'll
* be handy for debugging things. The set side is fine for now and
* being very small might be worth keeping for clean configuration.
*/
/* for compatibility with glibc net/if.h */
#if __UAPI_DEF_IF_IFMAP
struct ifmap {
unsigned long mem_start;
unsigned long mem_end;
unsigned short base_addr;
unsigned char irq;
unsigned char dma;
unsigned char port;
/* 3 bytes spare */
};
#endif /* __UAPI_DEF_IF_IFMAP */
struct if_settings {
unsigned int type; /* Type of physical device or protocol */
unsigned int size; /* Size of the data allocated by the caller */
union {
/* {atm/eth/dsl}_settings anyone ? */
raw_hdlc_proto *raw_hdlc;
cisco_proto *cisco;
fr_proto *fr;
fr_proto_pvc *fr_pvc;
fr_proto_pvc_info *fr_pvc_info;
/* interface settings */
sync_serial_settings *sync;
te1_settings *te1;
} ifs_ifsu;
};
/*
* Interface request structure used for socket
* ioctl's. All interface ioctl's must have parameter
* definitions which begin with ifr_name. The
* remainder may be interface specific.
*/
/* for compatibility with glibc net/if.h */
#if __UAPI_DEF_IF_IFREQ
struct ifreq {
#define IFHWADDRLEN 6
union
{
char ifrn_name[IFNAMSIZ]; /* if name, e.g. "en0" */
} ifr_ifrn;
union {
struct sockaddr ifru_addr;
struct sockaddr ifru_dstaddr;
struct sockaddr ifru_broadaddr;
struct sockaddr ifru_netmask;
struct sockaddr ifru_hwaddr;
short ifru_flags;
int ifru_ivalue;
int ifru_mtu;
struct ifmap ifru_map;
char ifru_slave[IFNAMSIZ]; /* Just fits the size */
char ifru_newname[IFNAMSIZ];
void * ifru_data;
struct if_settings ifru_settings;
} ifr_ifru;
};
#endif /* __UAPI_DEF_IF_IFREQ */
#define ifr_name ifr_ifrn.ifrn_name /* interface name */
#define ifr_hwaddr ifr_ifru.ifru_hwaddr /* MAC address */
#define ifr_addr ifr_ifru.ifru_addr /* address */
#define ifr_dstaddr ifr_ifru.ifru_dstaddr /* other end of p-p lnk */
#define ifr_broadaddr ifr_ifru.ifru_broadaddr /* broadcast address */
#define ifr_netmask ifr_ifru.ifru_netmask /* interface net mask */
#define ifr_flags ifr_ifru.ifru_flags /* flags */
#define ifr_metric ifr_ifru.ifru_ivalue /* metric */
#define ifr_mtu ifr_ifru.ifru_mtu /* mtu */
#define ifr_map ifr_ifru.ifru_map /* device map */
#define ifr_slave ifr_ifru.ifru_slave /* slave device */
#define ifr_data ifr_ifru.ifru_data /* for use by interface */
#define ifr_ifindex ifr_ifru.ifru_ivalue /* interface index */
#define ifr_bandwidth ifr_ifru.ifru_ivalue /* link bandwidth */
#define ifr_qlen ifr_ifru.ifru_ivalue /* Queue length */
#define ifr_newname ifr_ifru.ifru_newname /* New name */
#define ifr_settings ifr_ifru.ifru_settings /* Device/proto settings*/
/*
* Structure used in SIOCGIFCONF request.
* Used to retrieve interface configuration
* for machine (useful for programs which
* must know all networks accessible).
*/
/* for compatibility with glibc net/if.h */
#if __UAPI_DEF_IF_IFCONF
struct ifconf {
int ifc_len; /* size of buffer */
union {
char *ifcu_buf;
struct ifreq *ifcu_req;
} ifc_ifcu;
};
#endif /* __UAPI_DEF_IF_IFCONF */
#define ifc_buf ifc_ifcu.ifcu_buf /* buffer address */
#define ifc_req ifc_ifcu.ifcu_req /* array of structures */
#endif /* _LINUX_IF_H */
Life is a race … If you don’t run fast…
you will be like a broken andaa… Viru Sahastrabudhhe
We Do Unconventional
Things for your business
Scroll Down
Life is a race … If you don’t run fast…
you will be like a broken andaa… Viru Sahastrabudhhe
We Do
Unconventional
Things for your business
Scroll Down
Bored Of Old School Strategies?
Conventional strategies do no justice to complex modern problems. Bringing in kickass blueprints to escalate your exclusive ideas to the growth trajectory.
Falling In Love With Your Problems
Your problems are our play! You get to decide which ‘solutions’ feel like an astounding fuck yes!
Discover pitch-perfect marketing strategies to deliver complex ideas into simplified solutions.
Diversity in our problem solving approach makes us who we are!
For us every client and their offerings are unique. We offer tailored and hot-off-the-press strategies to produce a unique brand identity. Listening, evolving, and promoting your articles of faith is what makes our work kickass and compelling too!
Arise, awake, and stop not until the goal is achieved
Dr APJ Abdul Kalam
Creativity is seeing the same thing but thinking differently
Christopher Columbus
By prevailing over all obstacles one may unfailingly arrive at his chosen goal.
JRD Tata
Uncommon thinkers reuse what common thinkers refuse.
Lead The Way With Your New Digital Partners
Waiting to get viral? Don’t worry we’ve got your back!
Leading your way through business acumen and business strategies tailored to your needs.
Handholding you since your first lightbulb moment to making a mark in the industry through unique formulas. Bringing unexpected things to the table is in our DNA.
Producing Tailored Solutions
One solution for multiple solutions is hard to swallow. Creating tailored solutions for your unique problems
Setting Benchmarks
Doesn’t carving a path for others give the best kick ever?
Making A Difference
You can’t wait for a case study. You will be too late!
Polscy gracze coraz częściej wybierają kasyno bez weryfikacji przy wypłacie bez ukrytych opłat, aby cieszyć się szybkim dostępem do gier i przejrzystymi warunkami wypłaty wygranych. Tego typu platformy stawiają na uproszczoną rejestrację, nowoczesne metody płatności oraz jasne zasady dotyczące transakcji. Przed rozpoczęciem gry warto zapoznać się z opiniami innych użytkowników, aby ocenić jakość obsługi i niezawodność serwisu.
Jeśli chcesz znaleźć rzetelne opinie oraz porównać najlepsze platformy, casino Revolut Pay może pomóc Ci podjąć świadomą decyzję. Znajdziesz tam recenzje użytkowników, szczegóły bonusów oraz informacje o wpłatach i wypłatach w kasynach akceptujących Revolut.
People searching for gerçek canlı casino usually mean live-dealer roulette, blackjack, baccarat, or game-show tables streamed from a studio with a real dealer, rather than an RNG-only game. To assess authenticity, verify the operator’s licence directly with the regulator, check the named game provider and studio, look for clear rules and table limits, inspect withdrawal terms, and confirm that the service is legal in your jurisdiction; a foreign licence does not automatically make an operator legal in Türkiye.
[canlı casino lisans rehberi](https://guvenilircanlicasinos.com/)[gerçek krupiyeli oyunlar](https://www.livecasinos.com/tr/) [guvenilircanlicasinos](https://guvenilircanlicasinos.com/)
Many Dutch players now look for beste online casino iDEAL to benefit from secure iDEAL deposits, low minimum stakes, and quick withdrawals. These casinos integrate trusted Dutch payment infrastructure with streamlined cashout systems, ideal for users who value speed, simplicity, and transparent transactions. By consulting authentic player reviews, gamblers can identify sites that consistently deliver rapid payouts and a seamless gaming experience.
Gli online casinos with bancoposta sono principalmente operatori che accettano la carta Visa o Mastercard collegata al conto BancoPosta per depositi e, in alcuni casi, prelievi. Tra i nomi più citati in Italia figurano 888casino, SNAI, LeoVegas, Planetwin365, Gioco Digitale, Sisal e StarCasinò, con depositi minimi spesso tra 10€ e 20€ e limiti massimi che possono arrivare a diverse migliaia di euro. Per utilizzare la carta, di solito basta selezionare Visa o Mastercard alla cassa, inserire i dati della carta BancoPosta e completare la verifica 3D Secure; i prelievi possono tornare sulla stessa carta o sul conto tramite bonifico, con tempi tipici da 24 ore a 3–5 giorni lavorativi.
Gracze poszukujący sprawdzonych platform często wybierają kasyno niemcy, które oferuje przejrzyste zasady wypłat i bezpieczne metody płatności. Przed rejestracją warto porównać limity transakcji, czas realizacji przelewów oraz dostępne opcje wpłat, aby uniknąć niepotrzebnych opóźnień. Opinie innych użytkowników mogą pomóc ocenić rzetelność obsługi, jakość gier i ogólny komfort korzystania z platformy.
Oferty określane jako zagraniczne kasyna bonus bez depozytu mogą obejmować darmowe spiny lub niewielkie środki promocyjne przyznawane po rejestracji i weryfikacji konta. Przed skorzystaniem z promocji należy dokładnie sprawdzić wymagania obrotu, maksymalną wypłatę, czas ważności bonusu oraz ograniczenia dla użytkowników z Polski. Zagraniczna licencja nie legalizuje automatycznie działalności hazardowej w Polsce, dlatego warto zweryfikować operatora w oficjalnych źródłach i grać odpowiedzialnie .
