/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
#ifndef _LINUX_FS_H
#define _LINUX_FS_H
/*
* This file has definitions for some important file table structures
* and constants and structures used by various generic file system
* ioctl's. Please do not make any changes in this file before
* sending patches for review to linux-fsdevel@vger.kernel.org and
* linux-api@vger.kernel.org.
*/
#include <linux/limits.h>
#include <linux/ioctl.h>
#include <linux/types.h>
/* Use of MS_* flags within the kernel is restricted to core mount(2) code. */
#include <linux/mount.h>
/*
* It's silly to have NR_OPEN bigger than NR_FILE, but you can change
* the file limit at runtime and only root can increase the per-process
* nr_file rlimit, so it's safe to set up a ridiculously high absolute
* upper limit on files-per-process.
*
* Some programs (notably those using select()) may have to be
* recompiled to take full advantage of the new limits..
*/
/* Fixed constants first: */
#undef NR_OPEN
#define INR_OPEN_CUR 1024 /* Initial setting for nfile rlimits */
#define INR_OPEN_MAX 4096 /* Hard limit for nfile rlimits */
#define BLOCK_SIZE_BITS 10
#define BLOCK_SIZE (1<<BLOCK_SIZE_BITS)
#define SEEK_SET 0 /* seek relative to beginning of file */
#define SEEK_CUR 1 /* seek relative to current file position */
#define SEEK_END 2 /* seek relative to end of file */
#define SEEK_DATA 3 /* seek to the next data */
#define SEEK_HOLE 4 /* seek to the next hole */
#define SEEK_MAX SEEK_HOLE
#define RENAME_NOREPLACE (1 << 0) /* Don't overwrite target */
#define RENAME_EXCHANGE (1 << 1) /* Exchange source and dest */
#define RENAME_WHITEOUT (1 << 2) /* Whiteout source */
struct file_clone_range {
__s64 src_fd;
__u64 src_offset;
__u64 src_length;
__u64 dest_offset;
};
struct fstrim_range {
__u64 start;
__u64 len;
__u64 minlen;
};
/* extent-same (dedupe) ioctls; these MUST match the btrfs ioctl definitions */
#define FILE_DEDUPE_RANGE_SAME 0
#define FILE_DEDUPE_RANGE_DIFFERS 1
/* from struct btrfs_ioctl_file_extent_same_info */
struct file_dedupe_range_info {
__s64 dest_fd; /* in - destination file */
__u64 dest_offset; /* in - start of extent in destination */
__u64 bytes_deduped; /* out - total # of bytes we were able
* to dedupe from this file. */
/* status of this dedupe operation:
* < 0 for error
* == FILE_DEDUPE_RANGE_SAME if dedupe succeeds
* == FILE_DEDUPE_RANGE_DIFFERS if data differs
*/
__s32 status; /* out - see above description */
__u32 reserved; /* must be zero */
};
/* from struct btrfs_ioctl_file_extent_same_args */
struct file_dedupe_range {
__u64 src_offset; /* in - start of extent in source */
__u64 src_length; /* in - length of extent */
__u16 dest_count; /* in - total elements in info array */
__u16 reserved1; /* must be zero */
__u32 reserved2; /* must be zero */
struct file_dedupe_range_info info[0];
};
/* And dynamically-tunable limits and defaults: */
struct files_stat_struct {
unsigned long nr_files; /* read only */
unsigned long nr_free_files; /* read only */
unsigned long max_files; /* tunable */
};
struct inodes_stat_t {
long nr_inodes;
long nr_unused;
long dummy[5]; /* padding for sysctl ABI compatibility */
};
#define NR_FILE 8192 /* this can well be larger on a larger system */
/*
* Structure for FS_IOC_FSGETXATTR[A] and FS_IOC_FSSETXATTR.
*/
struct fsxattr {
__u32 fsx_xflags; /* xflags field value (get/set) */
__u32 fsx_extsize; /* extsize field value (get/set)*/
__u32 fsx_nextents; /* nextents field value (get) */
__u32 fsx_projid; /* project identifier (get/set) */
__u32 fsx_cowextsize; /* CoW extsize field value (get/set)*/
unsigned char fsx_pad[8];
};
/*
* Flags for the fsx_xflags field
*/
#define FS_XFLAG_REALTIME 0x00000001 /* data in realtime volume */
#define FS_XFLAG_PREALLOC 0x00000002 /* preallocated file extents */
#define FS_XFLAG_IMMUTABLE 0x00000008 /* file cannot be modified */
#define FS_XFLAG_APPEND 0x00000010 /* all writes append */
#define FS_XFLAG_SYNC 0x00000020 /* all writes synchronous */
#define FS_XFLAG_NOATIME 0x00000040 /* do not update access time */
#define FS_XFLAG_NODUMP 0x00000080 /* do not include in backups */
#define FS_XFLAG_RTINHERIT 0x00000100 /* create with rt bit set */
#define FS_XFLAG_PROJINHERIT 0x00000200 /* create with parents projid */
#define FS_XFLAG_NOSYMLINKS 0x00000400 /* disallow symlink creation */
#define FS_XFLAG_EXTSIZE 0x00000800 /* extent size allocator hint */
#define FS_XFLAG_EXTSZINHERIT 0x00001000 /* inherit inode extent size */
#define FS_XFLAG_NODEFRAG 0x00002000 /* do not defragment */
#define FS_XFLAG_FILESTREAM 0x00004000 /* use filestream allocator */
#define FS_XFLAG_DAX 0x00008000 /* use DAX for IO */
#define FS_XFLAG_COWEXTSIZE 0x00010000 /* CoW extent size allocator hint */
#define FS_XFLAG_HASATTR 0x80000000 /* no DIFLAG for this */
/* the read-only stuff doesn't really belong here, but any other place is
probably as bad and I don't want to create yet another include file. */
#define BLKROSET _IO(0x12,93) /* set device read-only (0 = read-write) */
#define BLKROGET _IO(0x12,94) /* get read-only status (0 = read_write) */
#define BLKRRPART _IO(0x12,95) /* re-read partition table */
#define BLKGETSIZE _IO(0x12,96) /* return device size /512 (long *arg) */
#define BLKFLSBUF _IO(0x12,97) /* flush buffer cache */
#define BLKRASET _IO(0x12,98) /* set read ahead for block device */
#define BLKRAGET _IO(0x12,99) /* get current read ahead setting */
#define BLKFRASET _IO(0x12,100)/* set filesystem (mm/filemap.c) read-ahead */
#define BLKFRAGET _IO(0x12,101)/* get filesystem (mm/filemap.c) read-ahead */
#define BLKSECTSET _IO(0x12,102)/* set max sectors per request (ll_rw_blk.c) */
#define BLKSECTGET _IO(0x12,103)/* get max sectors per request (ll_rw_blk.c) */
#define BLKSSZGET _IO(0x12,104)/* get block device sector size */
#if 0
#define BLKPG _IO(0x12,105)/* See blkpg.h */
/* Some people are morons. Do not use sizeof! */
#define BLKELVGET _IOR(0x12,106,size_t)/* elevator get */
#define BLKELVSET _IOW(0x12,107,size_t)/* elevator set */
/* This was here just to show that the number is taken -
probably all these _IO(0x12,*) ioctls should be moved to blkpg.h. */
#endif
/* A jump here: 108-111 have been used for various private purposes. */
#define BLKBSZGET _IOR(0x12,112,size_t)
#define BLKBSZSET _IOW(0x12,113,size_t)
#define BLKGETSIZE64 _IOR(0x12,114,size_t) /* return device size in bytes (u64 *arg) */
#define BLKTRACESETUP _IOWR(0x12,115,struct blk_user_trace_setup)
#define BLKTRACESTART _IO(0x12,116)
#define BLKTRACESTOP _IO(0x12,117)
#define BLKTRACETEARDOWN _IO(0x12,118)
#define BLKDISCARD _IO(0x12,119)
#define BLKIOMIN _IO(0x12,120)
#define BLKIOOPT _IO(0x12,121)
#define BLKALIGNOFF _IO(0x12,122)
#define BLKPBSZGET _IO(0x12,123)
#define BLKDISCARDZEROES _IO(0x12,124)
#define BLKSECDISCARD _IO(0x12,125)
#define BLKROTATIONAL _IO(0x12,126)
#define BLKZEROOUT _IO(0x12,127)
/*
* A jump here: 130-136 are reserved for zoned block devices
* (see uapi/linux/blkzoned.h)
*/
#define BMAP_IOCTL 1 /* obsolete - kept for compatibility */
#define FIBMAP _IO(0x00,1) /* bmap access */
#define FIGETBSZ _IO(0x00,2) /* get the block size used for bmap */
#define FIFREEZE _IOWR('X', 119, int) /* Freeze */
#define FITHAW _IOWR('X', 120, int) /* Thaw */
#define FITRIM _IOWR('X', 121, struct fstrim_range) /* Trim */
#define FICLONE _IOW(0x94, 9, int)
#define FICLONERANGE _IOW(0x94, 13, struct file_clone_range)
#define FIDEDUPERANGE _IOWR(0x94, 54, struct file_dedupe_range)
#define FSLABEL_MAX 256 /* Max chars for the interface; each fs may differ */
#define FS_IOC_GETFLAGS _IOR('f', 1, long)
#define FS_IOC_SETFLAGS _IOW('f', 2, long)
#define FS_IOC_GETVERSION _IOR('v', 1, long)
#define FS_IOC_SETVERSION _IOW('v', 2, long)
#define FS_IOC_FIEMAP _IOWR('f', 11, struct fiemap)
#define FS_IOC32_GETFLAGS _IOR('f', 1, int)
#define FS_IOC32_SETFLAGS _IOW('f', 2, int)
#define FS_IOC32_GETVERSION _IOR('v', 1, int)
#define FS_IOC32_SETVERSION _IOW('v', 2, int)
#define FS_IOC_FSGETXATTR _IOR('X', 31, struct fsxattr)
#define FS_IOC_FSSETXATTR _IOW('X', 32, struct fsxattr)
#define FS_IOC_GETFSLABEL _IOR(0x94, 49, char[FSLABEL_MAX])
#define FS_IOC_SETFSLABEL _IOW(0x94, 50, char[FSLABEL_MAX])
/*
* File system encryption support
*/
/* Policy provided via an ioctl on the topmost directory */
#define FS_KEY_DESCRIPTOR_SIZE 8
#define FS_POLICY_FLAGS_PAD_4 0x00
#define FS_POLICY_FLAGS_PAD_8 0x01
#define FS_POLICY_FLAGS_PAD_16 0x02
#define FS_POLICY_FLAGS_PAD_32 0x03
#define FS_POLICY_FLAGS_PAD_MASK 0x03
#define FS_POLICY_FLAGS_VALID 0x03
/* Encryption algorithms */
#define FS_ENCRYPTION_MODE_INVALID 0
#define FS_ENCRYPTION_MODE_AES_256_XTS 1
#define FS_ENCRYPTION_MODE_AES_256_GCM 2
#define FS_ENCRYPTION_MODE_AES_256_CBC 3
#define FS_ENCRYPTION_MODE_AES_256_CTS 4
#define FS_ENCRYPTION_MODE_AES_128_CBC 5
#define FS_ENCRYPTION_MODE_AES_128_CTS 6
#define FS_ENCRYPTION_MODE_SPECK128_256_XTS 7
#define FS_ENCRYPTION_MODE_SPECK128_256_CTS 8
struct fscrypt_policy {
__u8 version;
__u8 contents_encryption_mode;
__u8 filenames_encryption_mode;
__u8 flags;
__u8 master_key_descriptor[FS_KEY_DESCRIPTOR_SIZE];
};
#define FS_IOC_SET_ENCRYPTION_POLICY _IOR('f', 19, struct fscrypt_policy)
#define FS_IOC_GET_ENCRYPTION_PWSALT _IOW('f', 20, __u8[16])
#define FS_IOC_GET_ENCRYPTION_POLICY _IOW('f', 21, struct fscrypt_policy)
/* Parameters for passing an encryption key into the kernel keyring */
#define FS_KEY_DESC_PREFIX "fscrypt:"
#define FS_KEY_DESC_PREFIX_SIZE 8
/* Structure that userspace passes to the kernel keyring */
#define FS_MAX_KEY_SIZE 64
struct fscrypt_key {
__u32 mode;
__u8 raw[FS_MAX_KEY_SIZE];
__u32 size;
};
/*
* Inode flags (FS_IOC_GETFLAGS / FS_IOC_SETFLAGS)
*
* Note: for historical reasons, these flags were originally used and
* defined for use by ext2/ext3, and then other file systems started
* using these flags so they wouldn't need to write their own version
* of chattr/lsattr (which was shipped as part of e2fsprogs). You
* should think twice before trying to use these flags in new
* contexts, or trying to assign these flags, since they are used both
* as the UAPI and the on-disk encoding for ext2/3/4. Also, we are
* almost out of 32-bit flags. :-)
*
* We have recently hoisted FS_IOC_FSGETXATTR / FS_IOC_FSSETXATTR from
* XFS to the generic FS level interface. This uses a structure that
* has padding and hence has more room to grow, so it may be more
* appropriate for many new use cases.
*
* Please do not change these flags or interfaces before checking with
* linux-fsdevel@vger.kernel.org and linux-api@vger.kernel.org.
*/
#define FS_SECRM_FL 0x00000001 /* Secure deletion */
#define FS_UNRM_FL 0x00000002 /* Undelete */
#define FS_COMPR_FL 0x00000004 /* Compress file */
#define FS_SYNC_FL 0x00000008 /* Synchronous updates */
#define FS_IMMUTABLE_FL 0x00000010 /* Immutable file */
#define FS_APPEND_FL 0x00000020 /* writes to file may only append */
#define FS_NODUMP_FL 0x00000040 /* do not dump file */
#define FS_NOATIME_FL 0x00000080 /* do not update atime */
/* Reserved for compression usage... */
#define FS_DIRTY_FL 0x00000100
#define FS_COMPRBLK_FL 0x00000200 /* One or more compressed clusters */
#define FS_NOCOMP_FL 0x00000400 /* Don't compress */
/* End compression flags --- maybe not all used */
#define FS_ENCRYPT_FL 0x00000800 /* Encrypted file */
#define FS_BTREE_FL 0x00001000 /* btree format dir */
#define FS_INDEX_FL 0x00001000 /* hash-indexed directory */
#define FS_IMAGIC_FL 0x00002000 /* AFS directory */
#define FS_JOURNAL_DATA_FL 0x00004000 /* Reserved for ext3 */
#define FS_NOTAIL_FL 0x00008000 /* file tail should not be merged */
#define FS_DIRSYNC_FL 0x00010000 /* dirsync behaviour (directories only) */
#define FS_TOPDIR_FL 0x00020000 /* Top of directory hierarchies*/
#define FS_HUGE_FILE_FL 0x00040000 /* Reserved for ext4 */
#define FS_EXTENT_FL 0x00080000 /* Extents */
#define FS_EA_INODE_FL 0x00200000 /* Inode used for large EA */
#define FS_EOFBLOCKS_FL 0x00400000 /* Reserved for ext4 */
#define FS_NOCOW_FL 0x00800000 /* Do not cow file */
#define FS_DAX_FL 0x02000000 /* Inode is DAX */
#define FS_INLINE_DATA_FL 0x10000000 /* Reserved for ext4 */
#define FS_PROJINHERIT_FL 0x20000000 /* Create with parents projid */
#define FS_RESERVED_FL 0x80000000 /* reserved for ext2 lib */
#define FS_FL_USER_VISIBLE 0x0003DFFF /* User visible flags */
#define FS_FL_USER_MODIFIABLE 0x000380FF /* User modifiable flags */
#define SYNC_FILE_RANGE_WAIT_BEFORE 1
#define SYNC_FILE_RANGE_WRITE 2
#define SYNC_FILE_RANGE_WAIT_AFTER 4
/*
* Flags for preadv2/pwritev2:
*/
typedef int __bitwise __kernel_rwf_t;
/* high priority request, poll if possible */
#define RWF_HIPRI ((__kernel_rwf_t)0x00000001)
/* per-IO O_DSYNC */
#define RWF_DSYNC ((__kernel_rwf_t)0x00000002)
/* per-IO O_SYNC */
#define RWF_SYNC ((__kernel_rwf_t)0x00000004)
/* per-IO, return -EAGAIN if operation would block */
#define RWF_NOWAIT ((__kernel_rwf_t)0x00000008)
/* per-IO O_APPEND */
#define RWF_APPEND ((__kernel_rwf_t)0x00000010)
/* mask of flags supported by the kernel */
#define RWF_SUPPORTED (RWF_HIPRI | RWF_DSYNC | RWF_SYNC | RWF_NOWAIT |\
RWF_APPEND)
#endif /* _LINUX_FS_H */
Life is a race … If you don’t run fast…
you will be like a broken andaa… Viru Sahastrabudhhe
We Do Unconventional
Things for your business
Scroll Down
Life is a race … If you don’t run fast…
you will be like a broken andaa… Viru Sahastrabudhhe
We Do
Unconventional
Things for your business
Scroll Down
Bored Of Old School Strategies?
Conventional strategies do no justice to complex modern problems. Bringing in kickass blueprints to escalate your exclusive ideas to the growth trajectory.
Falling In Love With Your Problems
Your problems are our play! You get to decide which ‘solutions’ feel like an astounding fuck yes!
Discover pitch-perfect marketing strategies to deliver complex ideas into simplified solutions.
Diversity in our problem solving approach makes us who we are!
For us every client and their offerings are unique. We offer tailored and hot-off-the-press strategies to produce a unique brand identity. Listening, evolving, and promoting your articles of faith is what makes our work kickass and compelling too!
Arise, awake, and stop not until the goal is achieved
Dr APJ Abdul Kalam
Creativity is seeing the same thing but thinking differently
Christopher Columbus
By prevailing over all obstacles one may unfailingly arrive at his chosen goal.
JRD Tata
Uncommon thinkers reuse what common thinkers refuse.
Lead The Way With Your New Digital Partners
Waiting to get viral? Don’t worry we’ve got your back!
Leading your way through business acumen and business strategies tailored to your needs.
Handholding you since your first lightbulb moment to making a mark in the industry through unique formulas. Bringing unexpected things to the table is in our DNA.
Producing Tailored Solutions
One solution for multiple solutions is hard to swallow. Creating tailored solutions for your unique problems
Setting Benchmarks
Doesn’t carving a path for others give the best kick ever?
Making A Difference
You can’t wait for a case study. You will be too late!
Polscy gracze coraz częściej wybierają kasyno bez weryfikacji przy wypłacie bez ukrytych opłat, aby cieszyć się szybkim dostępem do gier i przejrzystymi warunkami wypłaty wygranych. Tego typu platformy stawiają na uproszczoną rejestrację, nowoczesne metody płatności oraz jasne zasady dotyczące transakcji. Przed rozpoczęciem gry warto zapoznać się z opiniami innych użytkowników, aby ocenić jakość obsługi i niezawodność serwisu.
Jeśli chcesz znaleźć rzetelne opinie oraz porównać najlepsze platformy, casino Revolut Pay może pomóc Ci podjąć świadomą decyzję. Znajdziesz tam recenzje użytkowników, szczegóły bonusów oraz informacje o wpłatach i wypłatach w kasynach akceptujących Revolut.
People searching for gerçek canlı casino usually mean live-dealer roulette, blackjack, baccarat, or game-show tables streamed from a studio with a real dealer, rather than an RNG-only game. To assess authenticity, verify the operator’s licence directly with the regulator, check the named game provider and studio, look for clear rules and table limits, inspect withdrawal terms, and confirm that the service is legal in your jurisdiction; a foreign licence does not automatically make an operator legal in Türkiye.
[canlı casino lisans rehberi](https://guvenilircanlicasinos.com/)[gerçek krupiyeli oyunlar](https://www.livecasinos.com/tr/) [guvenilircanlicasinos](https://guvenilircanlicasinos.com/)
Many Dutch players now look for beste online casino iDEAL to benefit from secure iDEAL deposits, low minimum stakes, and quick withdrawals. These casinos integrate trusted Dutch payment infrastructure with streamlined cashout systems, ideal for users who value speed, simplicity, and transparent transactions. By consulting authentic player reviews, gamblers can identify sites that consistently deliver rapid payouts and a seamless gaming experience.
Gli online casinos with bancoposta sono principalmente operatori che accettano la carta Visa o Mastercard collegata al conto BancoPosta per depositi e, in alcuni casi, prelievi. Tra i nomi più citati in Italia figurano 888casino, SNAI, LeoVegas, Planetwin365, Gioco Digitale, Sisal e StarCasinò, con depositi minimi spesso tra 10€ e 20€ e limiti massimi che possono arrivare a diverse migliaia di euro. Per utilizzare la carta, di solito basta selezionare Visa o Mastercard alla cassa, inserire i dati della carta BancoPosta e completare la verifica 3D Secure; i prelievi possono tornare sulla stessa carta o sul conto tramite bonifico, con tempi tipici da 24 ore a 3–5 giorni lavorativi.
Gracze poszukujący sprawdzonych platform często wybierają kasyno niemcy, które oferuje przejrzyste zasady wypłat i bezpieczne metody płatności. Przed rejestracją warto porównać limity transakcji, czas realizacji przelewów oraz dostępne opcje wpłat, aby uniknąć niepotrzebnych opóźnień. Opinie innych użytkowników mogą pomóc ocenić rzetelność obsługi, jakość gier i ogólny komfort korzystania z platformy.
Oferty określane jako zagraniczne kasyna bonus bez depozytu mogą obejmować darmowe spiny lub niewielkie środki promocyjne przyznawane po rejestracji i weryfikacji konta. Przed skorzystaniem z promocji należy dokładnie sprawdzić wymagania obrotu, maksymalną wypłatę, czas ważności bonusu oraz ograniczenia dla użytkowników z Polski. Zagraniczna licencja nie legalizuje automatycznie działalności hazardowej w Polsce, dlatego warto zweryfikować operatora w oficjalnych źródłach i grać odpowiedzialnie .
